DeeDent Dental 365 INC
Amber Mill
Amber Mill
Only for C14 size
Add 11 to cart and one will be free automatically!
Perfect for bulk orders and labs.
Couldn't load pickup availability
Amber® Mill – Machinable Lithium Disilicate CAD/CAM Block
Amber® Mill is a premium lithium disilicate CAD/CAM block designed for high-performance digital dentistry. With customizable translucency levels, natural fluorescence, excellent machinability, and strong mechanical properties, Amber® Mill enables precise and aesthetic restorations for modern clinics and dental laboratories.
- Machinable lithium disilicate glass-ceramic block
- Customizable translucency through heat-treatment
- Strength up to 450 MPa after full crystallization
- Outstanding fluorescence & natural opalescence
- High edge stability for precise milling
- Multiple block sizes for wide CAD/CAM system compatibility
- Ideal for inlays, onlays, veneers, crowns, and 3-unit bridges
Available Shades
Amber® Mill is offered in four translucency levels to match natural esthetics:
| Translucency | Shades |
|---|---|
| HT (High Translucency) | A1, A2, A3, A3.5, B1, B2, B3, C2, C4, D2, D3, W1, W2, W3, W4 |
| MT (Medium Translucency) | A1, A2, A3, A3.5, B1, B2, B3, C2, C4, D2, D3, W1, W2, W3, W4 |
| LT (Low Translucency) | A1, A2, A3, A3.5, B1, B2, B3, C2, C4, D2, D3, W1, W2, W3, W4 |
| MO (Medium Opacity) | A2, A3, B2, C2, D2, W1, W2 |
Translucency Heat-treatment Schedule
Amber® Mill allows adjustable translucency by selecting specific firing conditions. Below is the recommended schedule for DEKEMA Austromat 624i (Standard & Rapid Modes):
DEKEMA Austromat 624i – Standard Mode
| Mode | HT | MT | LT | MO |
|---|---|---|---|---|
| Close Time | 02:00 | 02:00 | 02:00 | 02:00 |
| Preheat | 450°C / 5:00 | 450°C / 5:00 | 450°C / 5:00 | 450°C / 5:00 |
| Temperature 1 | 830°C / 15:00 | 830°C / 15:00 | 830°C / 15:00 | 830°C / 15:00 |
| Temperature 2 (Hold) | 690°C / 15:00 | 690°C / 15:00 | 690°C / 15:00 | 690°C / 15:00 |
| VAC (off/level/hold) | 100% / 1500 | 100% / 1500 | 100% / 1500 | 100% / 1500 |
DEKEMA – Rapid Mode
| Mode | HT | MT | LT | MO |
|---|---|---|---|---|
| Close Time | 01:00 | 01:00 | 01:00 | 01:00 |
| Preheat | 450°C / 4:00 | 450°C / 4:00 | 450°C / 4:00 | 450°C / 4:00 |
| Temperature 1 | 830°C / 5:00 | 830°C / 5:00 | 830°C / 5:00 | 830°C / 5:00 |
| Temperature 2 | 690°C / 5:00 | 690°C / 5:00 | 690°C / 5:00 | 690°C / 5:00 |
| VAC | 100% / 1500 | 100% / 1500 | 100% / 1500 | 100% / 1500 |
Ivoclar Vivadent Programat
| B | S | t1 | T | H | VAC. 1 / VAC. 2 | TL |
|---|---|---|---|---|---|---|
| 400°C | 3.00 | 60°C/min | HT815 / MT825 / LT840 / MO860 | 15:00 | 550/815 | 0 |
Product Q&A
1. What is the translucency heat-treatment for?
Translucency heat-treatment embeds fine crystals into the glass matrix, enhancing translucency and mechanical properties.
2. What should be considered for translucency control?
Two factors determine translucency: temperature and holding time. Adjusting these creates HT, MT, LT, or MO levels from a single block.
3. Does veneering powder baking affect translucency?
No. Veneering does not significantly alter translucency.
4. Can translucency be changed by re-firing?
Yes. Re-firing increases translucency. For example, LT → HT levels are achievable.
5. What powders are compatible?
Compatible with veneering porcelains whose CTE is ≤ 10.0 × 10-6/°C. Zirconia powders compatible with firing ≤ 850°C can also be used.
Natural Opalescence & Fluorescence
Amber® Mill recreates the opalescent effect of natural enamel, showing bluish tones under reflected light and warm yellow hues under transmitted light. Its fluorescence mimics natural tooth structure, enhancing realistic esthetic outcomes.
Innovation That Works for You
Optimized for CAD/CAM Systems
Amber® Mill blocks provide excellent machinability, stable margins, and reduced chipping—ideal for high-precision milling workflows.
Strength for Long-term Longevity
Mechanical strength increases from 250 MPa (milling state) to 450 MPa (fully crystallized).
| Condition | Biaxial Flexural Strength |
|---|---|
| For Milling | 250 MPa |
| Final State | 450 MPa |
Multi-chromatic Gradation Effect
Even without staining, Amber® Mill restorations show beautiful color gradation from cervical to incisal thanks to its natural fluorescence and opalescence.
Indications
- Inlays
- Onlays
- Veneers
- Anterior Single Crowns
- Posterior Single Crowns
- 3-Unit Bridges (up to second premolar)
Product Line-up
| Product | Dimensions (mm) | Pcs / Pack |
|---|---|---|
| C12 | 10 × 12 × 15 | 5 Blocks |
| C14 | 12 × 14 × 18 | 5 Blocks |
| C32 | 14 × 14 × 32 | 3 Blocks |
| C40 | 15 × 15 × 38 | 3 Blocks |
| P9806 | Ø98 × 6T | 1 Disk |
| P9808 | Ø98 × 8T | 1 Disk |
| P9810 | Ø98 × 10T | 1 Disk |
| P9812 | Ø98 × 12T | 1 Disk |
| P9814 | Ø98 × 14T | 1 Disk |
Share
